Thursday, August 18, 2011

Honda CBR1000RR ABS

Honda CBR1000RR ABS features Honda's electronic Combined ABS. This all-new ECU-controlled, hydraulically actuated system provides accurate braking force distribution to both wheels. ABS is controlled by a hydroelectronic unit and stroke simulator to ensure precise operation. Benefits include consistent lever pressure without the pulsing often associated with ABS systems. Application of rear brake does not result in immediate front brake activation unless lock-up is sensed, allowing an experienced rider to use rear brake in a normal manner during spirited riding. Combined ABS components are smaller and lighter than conventional hydraulic ABS designs, and have been located nearer to the center of the machine, enhancing mass centralization and reducing unsprung weight.
- Super-light aluminum-alloy hollow-spoke wheels feature race-spec 3.5 x 17-inch front and 6.0 x 17-inch rear dimensions.
- Centrally mounted 4.7-gallon fuel tank is positioned low in the frame, increasing mass centralization and allowing a more compact design. This design positions the rider farther forward for optimum handling.

Motor: 4-cylinder, 4 stroke, double overhead cam (DOHC), 16-valve
Cooling: Water
Displacement: 999 cc
Bore / Stroke: 76 x 55.1 mm
Compression Ratio: 12.3: 1
Maximum Power: 131 kW (178 hp) / 12,000 rpm (95/1/EC)
Maximum Torque: 112 Nm / 8,500 rpm (95/1/EC)
Idle Speed: 1,200 min
Food: Electronic Fuel Injection PGM-DSFI Ø 46 mm
Air Filter: Dry type paper panel
On: Digital transistorized with electronic advance control
Start: Electrical
Battery Capacity: 12 V / 6 AH
Power Alternator: 372 W
Lighthouses: 12 V, 55 W x 1 (low) / 55 W x 2 (long)
Clutch: Oil-bathed multiplate with diaphragm spring
Clutch: Mechanical, cable
Transmission Type: 6-speed

No comments:

Post a Comment